Stairways in kit in galvanized steel with a 45° comfort ramp
NEVER AGAIN “HAND PRODUCED STAIRWAYS” WITHOUT STATIC CALCULATIONS
NEVER AGAIN “WAITING WEEKS FOR MEASURES AND CONSTRUCTION”
NEVER AGAIN “HIGH COST OF TRANSPORT AND ASSEMBLY”
EASY STEP IS READY FOR DELIVERY AND YOU ASSEMBLE IT ALONE IN 30 MINUTES
Fixed ladders are normally ordered to blacksmiths who make you wait long to take the measures and require an advance payiment before production. This requires an average of 20 working days. The stairway (normally in one piece) is then transported to your destination with high costs due to the large volume, and must be fitted with a crane from a specialized company charged with additional costs.
EASY STEP instead is a metal staircase in cold galvanized steel or painted steel, ready for delivery, which is on a pallet and can be assembled in 30 minutes. It is a combination of laser cutting steps with a unique and innovative design. They are “self-supporting”, with a double-acting anti-flexion longitudinal and transverse bracing. Only one component (step) assembled as many times as necessary to achieve the required height.
Each step is attached to the next with bolts and nuts M10.
DIMENSIONS AND STANDARD KIT COMPONENTS (the stairway is in cold galvanized steel and is ready for delivery): Adhesive strips for non-slip treads – Ramp width 90 cm. – Ramp inclination approx. 45° – Double handrails and guard-rails (right and left). 110 cm height – Steps ribbed steel laser cut and cold galvanized 28 cm deep and with a distance of only 18 centimeters from each other – Steps overlap (for no panic feeling) – Antiheel surface-tracking labels on each step – Installation Manual.
ON DEMAND (not ready for delivery): ramp width 60 cm or 120 cm (for large quantities) – landing platform (as wide as the ramp) – standard wall brackets or supports on the ground – RAL painting (for outside use).
Finishing steps: 1) with anti-heel mesh (for snow and ice) – 2) with embossed stainless steel.
HOW TO REQUEST A QUOTE: need to communicate the height from the floor to the landing. For outdoor installation the epoxy coating is recommended . Landing/rest platform is mandatory for L and U shape stairways, and stairs heigher more than 10 steps.
HOW LONG DOES IT TAKE TO GET IT?: Linear stairs 90 cm width (standard kit) are ready for delivery.
HOW LONG DOES IT TAKE TO ASSEMBLE IT?: An operator used to the DIY can assemble the stair of 10 steps in 30 minutes. The stair kit comes with all the screws, steps and railings required occupying minimum space on a small pallet.
TRANSPORT: To avoid problems and high transport costs the stair is supplied unassembled and can be easily assembled by the customer through the instruction booklet. The stair is self-supporting then simply attach it to the upper floor and/or the wall. This is possible up to ten / eleven steps. In the case of longer stairs (where it makes sense to do intermediate/rest platforms) than you must place a support intermediate post.
Any brackets to the wall or supports are provided by the customer unless explicitly request from SVELT.
The scale is tested, calculated and produced with the heighest standards.
They are also ideal to be shipped with equipment for long trips in areas where the cost of transport and installation by crane would be prohibitive.
Perfect for houses, office, shop, factory, etc..
Also available in stainless steel or wood for special environments.